• Roving
  • Gun Roving
  • Corrugated Sheet Roving
  • Filament Winding Roving
  • SMC Roving
  • Pultrusion Roving
  • Gypsum Roving
  • Alkali Resistant Roving
  • Direct Roving
  • Fiberglass Yarn
  • ECR Fiberglass Roving
• Chopped Strands
  • Thermoplastics
  • Thermoset (BMC)
  • Wet Chopped Strands
  • Alkali Resistant
  • Gypsum
  • High Silica
  • S-Glass
• Mats
  • Powder CSM
  • Emulsion CSM
  • Stitch Bound CSM
  • Continuous Filament Mat
  • ECR Chopped Strand Mat
• Woven & Nets
  • Woven Roving
  • Abrasive Reinforcement Discs
  • Abrasive Reinforcement Mesh
• Tissues
  • Fiberglass Tissue
  • Black Tissue
  • Roofing Tissue
  • Pipe Wrap Tissue
  • FRP Surface Tissue
• Mesh & Scrim
  • Alkali Resistant Mesh
  • Self-Adhesive Drywall Tape
  • Insect Screen
  • Fiberglass Scrim
  • Fiberglass Geogrid
  • Fiberglass Mesh Wall Patch
• FRP Products
  • FRP Gridmesh Grating Page 1/2
  • FRP Gridmesh Grating Page 2/2
  • FRP Handrails and Ladders
  • FRP Gridmesh Grating T-Bar Series
  • FRP Gridmesh Grating I-Bar Series
  • FRP Profiles
  • Fiberglass Camouflage Sheets
• Filtrations & Insulation
  • PCB Fabrics
  • Alumiunium Filtration Fabric
  • High Silica Fabric
    • High Silica Yarn & Filter Mesh
  • High Silica Chopped Strands
  • High Silica Insulation
  • Fiberglass Needled Mat
  • Dust Filtration Fabric
  • Industrial Fabric
  • Fire Resistant Fiberglass Rigid Board
• Special Products
  • 3-D Fiberglass Sandwich Woven Fabrics
  • Texturized Yarn
  • S-Glass Materials
  • Silicone Fiberglass Fabric
  • Basalt Fiber
  • Carbon Fiber
  • Multiaxial Fabric

S-Glass Materials

3D Fiberglass Fabric | Texturized Yarn |  S-Glass Materials |  Silicone Fiberglass Fabric | Basalt Fibers
Carbon Fiber | Multiaxial Fabric

S-glass materials - HS2 and HS4 - are high strength glass fibers made from magnesium alumina silicate system which meets the needs of military and other applications where high strength and high performance is required.

Available Materials S-Glass Textile Yarn S-Glass Multi-End Roving S-Glass Chopped Strands S-Glass, E-Glass, Carbon Milled Fibers S-Glass Unidirectional Fabrics S-Glass Woven Roving S-Glass Fabrics

Above - S-Glass multi end roving  available at a competitive price.

Compared to E-Glass, S-glass has the following features and benefits   30 to 40% better tensile strength   16 to 20% higher modulus of elasticity   100 to 150 degrees celsius better temperature endurance   10 fold higher fatigue resistance   Excellent impact resistance because of the high elongation to breakage   High ageing and corrosion resistance   Quick resin wet-out properties   Weight saving at the same performance Applications Aerospace, marine and arms industries due to its high tensile strength and higher modulus of elasticity when compared to e-glass.

Above - S-Glass Woven Roving  available 260 to 810g/m2 weights

S-Glass Textile Yarn Specifications
Style No.	Tex	Twists (TPM)	Breaking Strength
SC8--12x1x2	24 ±2.4	55 / 110	≥ 14 N
SC8--12x2x2 SC8--24x1x2	48 ±4.8	55 / 110	≥ 28 N
SC8--12x2x3 SC8--24x1x3	72 ±7.2	55 / 110	≥ 42 N
SC8--12x2x4 SC8--24x1x4	96 ±9.6	55 / 110	≥ 56 N

 

S-Glass Multi-End Roving Specifications
Style No.	Filament Diameter	Linear Density (Tex)	Breaking Strength
SC-240	8, 11	240 ±18	≥ 120 N
SC-480	8, 11	480 ±36	≥ 200 N
SC-660	9, 11	660 ±49	≥ 297 N
SC-960	9,11,13	960 ±72	≥ 350 N
SC-1200	9,11,13	1200 ±90	≥ 500 N
SC-1980	9,11,13	1980 ±100	≥ 890 N
SC-2400	9,11,13	2400 ±120	≥ 1000 N

•  S-Glass Chopped Strands -- Cut lengths 3, 6, 9 and 12mm

Sizing and Compatible Resins

Size	Compatible Resins	Manufacturing Process
FE-5, JA11, B, HA-2	Epoxy, Phenolics	Filament Winding, Laminating.
JA17, WY17	Unsaturated Polyester, Vinyl Ester	Pultrusion
PA, PC	PA, PC	Thermoplastics, PA, PC
Starch, Wax	Must be heat cleaned

• Milled Fibers
  Milled fibers are made from s-glass high strength fiberglass, e-glass, and carbon fiber by a grounding, drying and screening process. This material is an ideal filler materials for thermoplastics and thermo set matrixes. It improves the physical properties of the product such as stiffness, can prevent cracks, improves temperature resistance, and improves dimensional stability.

Specification	Milled S Glass Fiber	Milled E Glass Fiber	Milled Carbon Fiber
Density (g/cm3)	2.54	2.2 - 2.3	1.75 - 1.8
Filament Diameter (um)	8 - 13	10 - 15	7 - 8
Aspect Ratio	5 - 30	5 - 30	3 - 12
Size (mesh)	100 - 400	100 - 400	100 - 400

• S Glass High Strength Unidirectional Fabrics and Woven Roving
    High strength unidirectional fabric made through a hot melt process employing HS fiberglass roving as warps, heat set yarns as fills which insures minimum reinforcement warpage and optimum properties.
    High strength fiberglass woven roving is bi-directional fabric made by interweaving HS fiberglass roving in plain or twill weave patterns.
    Both are ideal reinforcement materials for sport and recreation parts, ballistic armour, and for strengthening materials for buildings

Specifications for S Glass Unidirectional Fabric
Style No.	Warp Tex	Fill	Count (ends/cm)		Weight (G/m2)	Thickness (mm)
SWU414	660	Heat set yarn	W. 6.1	F. 1.6	414	0.34
SWU288	660	Heat set yarn	W. 4.1	F. 1.6	288	0.24
SWU220	400	Heat set yarn	W. 5.1	F. 1.6	220	0.18
SWU173	400	Heat set yarn	W. 3.9	F. 1.6	173	0.14

 .

Specifications for S Glass Woven Roving
Style No.	Warp Tex	Fill Tex	Count (ends/cm)		Breaking Strength > (N/25mm)		Weight (G/m2)
SWR260	240	240	W. 6.1	F. 4.7	1800	1400	260
SWR480	480	480	W. 5.0	F. 5.0	2700	2700	480
SWR600	1290	1290	W. 2.7	F. 1.9	4350	3050	610
SWR800	2033	2033	W. 2.0	F. 2.0	4570	4570	810

• High Strength S Glass Fiber Fabric
    High strength fiberglass fabric made of direct-sized yarns which can be compatible with epoxy and vinyl ester resins without heat cleaning. The weave patterns available include plain, twill and satin. Thickness range from 0.08mm up to 0.30mm. Width is 90cm and above. High strength fiberglass fabrics are ideal reinforced material for aerospace, marine, arms industries thanks to its higher tensile strength and modulus when compared with e-glass fiberglass fabrics

Specifications for High Strength S Glass Fiber Fabric
Style No	Yarn Description	Count (ends/cm)		Breaking Strength (N/25mm)		Weight (G/m2)	Weave Pattern
		Warp	Fill	Warp	Fill
SW80B-90b	SC8-12 x 1 x 2	16	16	500	500	80	2/2 Twill
SW100A-90a	SC8-12 x 1 x 2	20	20	550	550	100	Plain
SW110C-90a	SC8-12 x 1 x 2	22	22	600	600	110	4HS
SW140B-90a	SC8-12 x 2 x 2	14	14	900	900	140	2/2 Twill
SW140C-90a	SC8-12 x 2 x 2	14	14	900	900	140	4HS
SW180D-90a	SC8-12 x 2 x 2	18	18	1200	1200	180	5HS
SW210B-92a	SC8-12 x 2 x 3	16	12	1600	1350	210	2/2 Twill
SW210A1-92a	SC8-24 x 1 x 3	16	12	1600	1350	210	Plain
SW220B-90a	SC8-12 x 2 x 3	18	14	1900	1600	240	2/2 Twill
SW220C-90a	SC8-12 x 2 x 3	18	14	2000	1600	240	4HS
SW220D-90a	SC8-12 x 2 x 3	18	14	2000	1600	240	5HS
SW220B-90b	SC8-12 x 2 x 3	18	14	1900	1600	240	2/2 Twill
SW220C-90b	SC8-12 x 2 x 3	18	14	1900	1600	240	4HS
SW240F-92a	SC8-12 x 2 x 3	20	14	2700	1500	260	8HS
SW280F1-90a	SC8-24 x 1 x 3	20	18	2000	1700	280	8HS