Fiberglass High Silica Fabric - Lance Brown Import-Export ®

High Silica Fabric | Yarn, Chopped Strands and Filter Mesh | High Silica Scrim

This product is a special fiberglass fabric which contains more than 95% silicon dioxide. Excellent heat resistance, it can withstand continuous temperatures of 900 degrees celsius for long periods of time, and instantaneous temperatures of up to 1400 degrees celsius. Ideal material for missile and rocket manufacture in the aerospace industry where high-temperature burning occurs. Other products include yarn and filtration mesh pieces which are treated with a high-temperature heat resistance coating. This product is ideal for heat preservation material, fire fighting equipment like fire curtains and fireproof garments. Very good in dust collection and filtration equipment where special material is needed to withstand high temperature gas, and in filtering high-temperature liquid metal.

**High Silica Fabric Specifications**
Product No.	Thickness (mm)	Mass (g/m2)	Width (mm)	Length/Roll (m)	Weave Type
BWT100	0.10	80	820	150	Plain
SH-330	0.33	180	860	60	Satin
BWT260	0.26	240	820	85	Plain
JSS1882HT	0.36	340	860	85	Plain
SH-1884 BWT-600-86	0.65	600	860	50	Satin
SH-1584 BWT-760-86	0.76	680	860	50	Satin
SH-1888 BWT-1260-86	1.26	1150	860	30	Satin
JSS-1885	1.50	1300	860	30	Satin
SH-1510	1.50	1360	860	30	Satin

High Silica Yarn

This yarn has a fixed length and is used for phenolic resin reinforcement and deforming of centering resistant wares.

Length (nominal): 950 +/- 150mm
Density (nominal): 85 +/- 15tex
Breaking strength: >= 4.0 N
SiO2 content: >=96%
Loss on ignition: <=3%

High Silica Chopped Strands

High silica chopped strands is made from high silica yarn (as above).

Cut length: 6mm
Filament diameter: 7 micron
Density (nominal): 85 +/- 15tex
Breaking strength: >= 4.0 N
SiO2 content: >=96%
Loss on ignition: <=3%

High Silica Casting Filter Mesh

High silica fiberglass casting filter mesh is treated by high-temperature resistant coating to form rigid sheets. It is used for filtering melting metal in the casting of grey cast iron and ductile cast iron. Two types of filter mesh are available:

XR-II: leno woven (XR-IIa is a lighter style for iron; XR-IIb a heavy style for steel) and suitable for grey cast iron and ductile cast iron.
XR-III: mock leno woven and suitable for small scale cast steel.

Standard hole size: 1.5x1.5, 2.0x2.0, 2.5x2.5 and 3.0x3.0mm
Standard sheet size: 300x150mm, other sizes to a maximum of 1000 x 800mm are available upon request.

**Specifications for High Silica Casting Filter Mesh**
Panel Size (mm)		Hole Size (mm)	Porosity (%)
Panel Size (mm)		Hole Size (mm)	XR-II-A	XR-II-B	XR-III
300 x 150
		1.5 x 1.5	55	-	19
		2.0 x 2.0	65	45	24
		2.5 x 2.5	70	45	33
		3.0 x 3.0	70	-	-
Style	Working Temperature (degrees C)	Soft Point (degrees C)	Continuous Working Time	Tensile Strength at Room Temperature (kg/4 ends)	Gas Forming (cm3/g)	Suitable Use
XR-II	1400 - 1450	1700	< 10 minutes	> 11	< 60	Grey cast iron and ductile cast iron.
XR-III	1600 - 1620	1700	< 15 seconds	> 16	< 60	Small scale cast steel

High Silica Scrim

High silica scrim and mock leno scrim are base materials for foundry filtration.

Specifications for High Silica Scrim
Style	Width (cm)	Weight (g/m2)	Mesh (mm)	Breaking Strength (N/25 x 100mm)		Porosity (%)	Si02 Content (%)	Weave
Style	Width (cm)	Weight (g/m2)	Mesh (mm)	Warp	Weft	Porosity (%)	Si02 Content (%)	Weave
BNT1.5x.1.5-83	83 ± 3	135 ± 14	1.5 x 1.5	≥ 90	≥ 80	55	≥ 96	Leno
BNT2x2-83	83 ± 3	125 ± 13	2.0 x 2.0	≥ 85	≥ 70	65	≥ 96	Leno
BNT2.5x2.5-83	83 ± 3	110 ± 11	2.5 x 2.5	≥ 68	≥ 62	70	≥ 96	Leno
BNT1.5x.15-83M	83 ± 3	480 ± 48	1.5 x 1.5	≥ 450	≥ 400	19	≥ 96	Mock Leno
BNT2x2-83M	83 ± 3	440 ± 44	2.0 x 2.0	≥ 400	≥ 350	24	≥ 96	Mock Leno
BNT2.5x2.5-83M	83 ± 3	365 ± 36	2.5 x 2.5	≥ 300	≥ 250	33	≥ 96	Mock Leno