Pultruded FRP Grating - I-Bar Series

This quality I-Bar pultruded grating has a higher load capacity than standard molded fiberglass grating, and the same lightweight and corrosion resistant properties.

The grating is available in a premium grade polyester or vinyl ester resin. A course epoxy grit is bonded to both the bearing bar and the flush top cross rod. The standard cross rod spacing is 152mm (6"). By special order, other grating are available with bearing bar spacings to your requirements. Economical 305mm (12") cross rod spacing is available by special order.

Pultruded I-Bar fiberglass grating - high load capacity, lightweight and corrosion resistant
Above - Pultruded I-Bar fiberglass grating. Higher load capacity than standard molded fiberglass grating. Same lightweight and corrosion resistant properties.
  • Flush top or regular cross bars
  • 26mm (1") or 38mm (1.5") bar heights
  • Lengths 3050mm (10'), 3660mm (12') or 6100mm (20')
  • Widths 915mm (3'), 1220mm (4') or 1525mm (5')
  • Yellow or grey with grit-top surfaces
  • Other colours and resins available by special order
  • Made to ISO9001 International Quality Standard
I-Bar Series Item No Bearing Bar Size A B C Open Area

Flush Top		 FI-4010 26x15mm 26mm 10mm 10mm 40%
1x3/5" 1" 0.4" 0.4"
FI-5010 26x15mm 31mm 15mm 15mm 50%
1x3/5" 1.2" 0.6" 0.6"
FI-6010 26x15mm 38mm 23mm 23mm 60%
1x3/5" 1.5" 0.9" 0.9"

Flush Top		 FI-4015 38x15mm 26mm 10mm 10mm 40%
1-1/2x3/5" 1" 0.4" 0.4"
FI-5015 38x15mm 31mm 15mm 15mm 50%
1-1/2x3/5" 1.2" 0.6" 0.6"
FI-6015 38x15mm 38mm 23mm 23mm 60%
1-1/2x3/5" 1.5" 0.9" 0.9"

Regular Top		 RI-4010 26x15mm 26mm 10mm 10mm 40%
1x3/5" 1" 0.4" 0.4"
RI-5010 26x15mm 31mm 15mm 15mm 50%
1x3/5" 1.2" 0.6" 0.6"
RI-6010 26x15mm 38mm 23mm 23mm 60%
1x3/5" 1.5" 0.9" 0.9"

Regular Top		 RI-4015 38x15mm 26mm 10mm 10mm 40%
1-1/2x3/5" 1" 0.4" 0.4"
RI-5015 38x15mm 31mm 15mm 15mm 50%
1-1/2x3/5" 1.2" 0.6" 0.6"
RI-6015 38x15mm 38mm 23mm 23mm 60%
1-1/2x3/5" 1.5" 0.9" 0.9"