Pultruded FRP Grating - T-Bar Series

This quality T-Bar pultruded grating has a higher load capacity than standard molded fiberglass grating, and the same lightweight and corrosion resistant properties.

The grating is available in a premium grade polyester or vinyl ester resin. A course epoxy grit is bonded to both the bearing bar and the flush top cross rod. The standard cross rod spacing is 152mm (6"). By special order, other grating are available with bearing bar spacings to your requirements. Economical 305mm (12") cross rod spacing is available by special order.

Pultruded T-Bar fiberglass grating - high load capacity, lightweight and corrosion resistant
Above - Pultruded T-Bar fiberglass grating. Higher load capacity than standard molded fiberglass grating. Same lightweight and corrosion resistant properties.
  • Flush top or regular cross bars
  • 26mm (1") or 38mm (1.5") bar heights
  • Lengths 3050mm (10'), 3660mm (12') or 6100mm (20')
  • Widths 915mm (3'), 1220mm (4') or 1525mm (5')
  • Yellow or grey with grit-top surfaces
  • Other colours and resins available by special order
  • Made to ISO9001 International Quality Standard
T-Bar Series Item No Bearing Bar Size A B C Open Area

Flush Top		 FT-3320 51x26mm 38mm 13mm 23mm 33%
2x1" 1.5" 0.5" 0.9"
FT-5052 51x26mm 51mm 26mm 36mm 50%
2x1" 2" 1" 1.4"

Regular Top		 RT-3320 51x26mm 38mm 13mm 23mm 33%
2x1" 1.5" 0.5" 0.9"
RT-5052 51x26mm 51mm 26mm 36mm 50%
2x1" 2" 1" 1.4"

Wide Top		 WT-1810 26x41mm 51mm 10mm 36mm 18%
2x1-5/8" 2" 0.37" 1.4"
WT-3510 26x41mm 64mm 22mm 48mm 35%
1x1-5/8" 2.5" 0.87" 1.9"